Epoxy.com Product #101
Epoxy Body Coat
Epoxy Slurry and Epoxy Self Leveling Coating (paint)
Description
Epoxy.com Product #101 Epoxy Body Coat is an epoxy coating for
commercial and light industrial floors. Epoxy.com Product #101 Epoxy Body Coat
is designed for slurry and self-leveling epoxy flooring applications. Epoxy.com
Product #101 Epoxy Body Coat helps to smooth seamless epoxy floors that are to
receive Epoxy.com Seamless Epoxy Flooring and Epoxy.com Seamless Epoxy Coating
(paint) systems. Epoxy.com Product #101 Epoxy Body Coat provides an extra
thickness to protect the substrate from chemical attack. Epoxy.com Product #101
Epoxy Body Coat protects the substrate from impact and adds additional abrasion
resistance to Epoxy.com Seamless Epoxy Flooring and Epoxy.com Seamless Epoxy
Coating (paint) systems.
Advantages
- 100% Solids, Zero (0) VOC, means it meets even the strictest low VOC standards
- Cost Effective
- Very Low Odor - Zero (0) VOCs means it meets even the toughest low VOC
standards
- Low Viscosity - means it has excellent wetting and self-leveling
properties
- Can be used to level and smooth floors
- Can be made anti-skid most Epoxy.com Epoxy Anti-Skid Coatings (paints)
or Epoxy.com Anti-Skid Epoxy Flooring System.
Consideration
- Normal Cured Epoxy.com Product #101 requires a minimum temperature of 50° F. to cure. If it will be below 50° F. please contact Epoxy.com for information low temperature cure.
- Substrate must be clean and sound.
- Slight color variation from batch to batch. So typically you will need to seal this with an Epoxy.com Coating
Composition
Epoxy.com Product #101 Epoxy Body Coat is a 100% solids Zero (0) VOC epoxy
resin and epoxy hardener system.
Application
Surface preparation is the first critical step to the installation of a quality seamless flooring system. All substrates to receive Epoxy.com Product #101 Epoxy Body Coat, should be properly prepared.
See Epoxy.com Surface Preparation Guide
for more details
Installation will vary by application. Contact Epoxy.com Technical
Support Department for additional information.
Physical Properties |
| Color | Light Grey, Brick Red, White, & Buff
(other colors by request,
subject to minimum quantity and/or upcharge) |
| Weight/gallon | 10.50-11.0 mixed |
| Solids Content | 100% |
| Mix Ratio | 4A to 1B by volume |
| Pot Life | 45 minutes @ 70° F |
| Viscosity | 1500 cps, mixed approx. |
| VOC | Zero(0) |
Dry Time |
| 10-20 mil Film | 10-14 hours |
| Light Traffic | 16 hours |
| Ultimate Cure @ 74° F | 5 days |
| @50° F | 14 days |
Chemical Resistance |
| |
|
| Reagent |
Rating |
| Acetic Acid 5% |
R |
| Ammonium Hydroxide 10% |
R |
| Citric Acid 5% |
R |
| Coca-Cola Syrup |
R |
| Crude Oil |
R |
| Diesel Fuel |
R |
| Ethylene Glycol |
R |
| Isopropyl Alcohol |
R |
| Ketchup |
R |
| Mineral Oil |
R |
| Sodium Hydroxide 5% |
R |
| Tri-sodium Phosphate 5% |
R |
| Urea 6.6% |
R |
R = continuous service
L = Limited Recommendation, occasional spills |
Performance Properties |
| Tensile Strength ASTM-C-307 | 2,300 psi |
| Smoke Deposited ASTM E-162 | 4 mg. max. |
| Flame Spread ASTM-162 | 25 max. |
| Shrinkage ASTM C-531 | <0.5% |
| Thermal Coefficient of Expansion ASTM C-531 | 17.4 x 10-6 in./in./°F |
| Adhesion - ACI-503R | 300 psi (100% concrete failure Type I) |
| Hardness ASTM-D-2240 | 75 (Shore D) |
| Abrasion, Taber CS-17 ASTM-D-4060 | 0.065 g loss |
| Resistance to Elevated Temperatures | No slip or flow at required temperatures |
| Impact Resistance MTI-D-3134J | Withstands 16ft./lbs. no cracking, delamination or chipping |
| Indentation MIL-D-3134J | Withstands 2,000 lbs./sq.in. for 30 min. without indentation. |
| Heat Deflection Temperature ASTM D-648 | 110°F |
| Moisture Absorption | <1% |
| Flexural Strength ASTM-C-580 | 5,000 psi |
| Compressive Strength ASTM-C-579, 25 Day Cure | 12,000 psi |
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
5875532
|