Epoxy.com Product #213

Decoupage Epoxy

Epoxy.com Product #213 Decoupage Epoxy is a two component, 100% solids, epoxy resin system. When mixed at a 1:1 ratio, Epoxy.com Product #213 provides a decoupage grade epoxy surface for wood products. Product #213 gives a beautiful elegant mar resistant surface that will enhance the look and value of wood for years to come.

ADVANTAGES:

Beautiful Finish
Easy 1"A" to 1"B" mix ratio
Self leveling and flowable

PHYSICAL PROPERTIES:

Color	Component "A" - Light Straw Component "B" - Clear
Mixed	Clear (transparent)
Viscosity	2000 cps
Pot Life	30 minutes @ 75°F (24°C)
Tack-Free (thin film)	6 hrs. @ 75°F
Final Cure	3 days @ 75°F (24°C)
Shelf life	1 year

WHERE TO USE:

Wood surface, tables, clocks, art projects.

SURFACE PREPARATIONS:

Remove dust, laitance, or grease, sand to desired finish.

MIXING:

Material should range between 65° F and 85°F to facilitate ease of mixing. Stir material well. Mix for 2-3 minutes. Let any air from mixing out and apply to surface immediately. Avoid entrapping air.

APPLICATION:

Pour on level surface. Heating Epoxy.com Product #213 with a propane torch after pouring on surface will eliminate the air bubbles. Care must be taken to avoid scorching Epoxy.com Product #213

COVERAGE:

12.8 SF/gallon @ 1/8" thick.

LIMITATIONS:

Do not thin Epoxy.com Product #213 Solvents will prevent proper cure.

CAUTION:

WARNING! "A" Component contains epoxy resin. May cause skin sensitization or other allergic responses. Use good ventlation, particularly if the material is heated or sprayed. Prevent al contact with skin and eyes. Wear protective clothing, goggles, gloves, and/or barrier creams. "B" Component: Contains alkaline amines; strong sensitizer. Do not get into eyes, on skin or clothing. Avoid breathing vapor. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

FIRST AID:

In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse. Discard contaminated shoes. Wear protective clothing, goggles, gloves, and/or barrier creams.

Similar Products:

Product #214 Tabletop Resin- an all-purpose, low viscosity Epoxy System for coating wooden counter tops, tabletops, bar tops and similar applications. It forms a glossy, hard surface, which is resistant to stains. It has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas

Product #1700 epoxy compound used as an electrical encapsulation material where ease of use and high electrical resistivity are needed. It is a low viscosity, low odor material with a pourable viscosity. It has a convenient 1 to 1 by volume mix ratio and a long pot life. It has a very low exotherm on curing allowing for large parts with extremely low shrinkage.