Question About Epoxy.com Seamless Flooring Products
Epoxy.com Seamless Epoxy Flooring - Insuring the Highest Quality Epoxy Installation
Below are some of the questions that have been emailed to Norm Lambert at
norm@epoxy.com and some of his answers.
Have a question for Epoxy.com? If so, please email Epoxy.com Technical Support.
Which Epoxy.com Seamless Epoxy Flooring is the best?
Q: "I would like to install a seamless epoxy floor.
Which Epoxy.com seamless epoxy floor system is the very best?"
Norm Lambert: The best Epoxy.com Floor is the
one that is right for you. Everyone's need is slightly different. That
is why Epoxy.com has many different types of seamless epoxy flooring.
Actually some of our seamless flooring is not epoxy at all. We also
compound aliphatic polyurethane and Methyl Methacrylate flooring and
coatings as well. Think of Epoxy.com Seamless flooring and coating
systems as a tool box full of tools. Our job at Epoxy.com
is to make sure you have the right seamless epoxy flooring product
for your needs. Don't settle for "One Size Fits All". Let us
help you pick out the material that is best for you.
I have a concrete mechanical room floor that I want to install a waterproof coating over.
It has areas under it that I do not want to get wet. Due to the vibration I want
to be sure we have good crack isolation for the concrete floor as well as being
waterproof. Which Epoxy.com Coating System do you recommend?
Norm Lambert:
1.Prepare the concrete properly –
www.epoxy.com/surfaceprep.aspx.
2. If there are any random cracks, repair them with Epoxy.com Product #685 –
www.epoxy.com/685.htm MMA Polymer Crack Healer & Sealer. This material will weld the cracks back together structurally, making it as though the
cracks never happened.
3. Fill any saw cut relieve joints with Epoxy.com Product #11 –
www.epoxy.com/11.htm 100% Solids Epoxy Joint Filler.
4. Cold joints can be saw-cut and filled with Epoxy.com Product #11. If cold joints are large enough, saw cutting
may be optional. Or if the cold joints are to be non-moving you can fill them with Epoxy.com Product #685.
5. Install 1 coat of Epoxy.com Product #899 - www.epoxy.com/899.aspx - 100% Solids Low-Mod Low Viscosity Zero (0) VOC Epoxy Primer at a rate
of 250-300 SF per gallon per coat. Allow to dry overnight.
6. Install 2 coats of Epoxy.com Product #32 –www.epoxy.com/32.aspx - Epoxy.com
Product #32 100% Solids Flexible Epoxy Membrane – Crack Isolation Epoxy. Allow to dry overnight after both coats.
7. Install 2 coats of Epoxy.com Product #2 – www.epoxy.com/2.htm - 100% Solids
Epoxy Based Chemical Resistant Coating with an optional Epoxy Product#50 (small) or Product #51 (large) Anti-Skid additive. Epoxy.com Product#50 and
#51 are polypropylene beads that mix with your Product #2 to produce the desired Anti-skid.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
593
|